Raspberry Pi 3 Model B+ 3.5 inch Touchscreen LCD + ABS Case + 32GB SD Card + 3A Power Adapter + Heatsinks + HDMI for RPI 3B Plus
3.5 inch touch screen is the most popular touch screen for Raspberry Pi . Here we design a dual use ABS case for Raspberry Pi with 3.5 inch touch screen . It means you can use the case to install Raspberry Pi and 3.5 touch screen or install Raspberry Pi with cooling Fan. We need to mention you that when you install the 3.5 inch touch screen , the can't install the cover and fan at the same time. The case has black , gray , white and transparent 4 color to choose.
Please leave a message that which Case Color ( Black / Gray / White / Transparent) and Power Plug ( EU / US / UK / AU ) do you want in the order note , otherwise we will send them by ourselves , please understand.
The products included in the Bundle 1 to Bundle 6 are listed in following table , please choose the correct Bundle you need.
1. Case :
(1). Daul use : First use : install Raspberry Pi with 3.5 inch touchscreen ; Second use : install Raspberry Pi with cooling fan ( as the following picture show )
(2). Material : ABS
(3). Color : Black / Gray / White / Transparent
(4). How to install the 3.5 inch touchscreen :
a). Install the Raspberry Pi on the base board
b). Please stick the pad on the back of 3.5 inch touchscreen ( as the picture show ) , then insert the 3.5 inch touchscreen on Raspberry Pi by GPIO pin correctly ( don't be malposed )
c). Install the enclosure part
2. Power Adapter :
(1). Input : 100 - 240V, 50/60Hz AC
(2). Output : 5V 3A , DC
(3). Plug : EU / US / UK / AU ( leave a message in the order for the type you want )
(4). Chariging cable : with ON/OFF switch button on it to cut off or start the power , about 1M length
3. SD Card : 32GB capacity , Class 10 standard , with USB 2.0 SD Card reader
4.HDMI Cable : Male to Male , about 1M length
5. Heatsinks : 2 copper one + 1 aluminum one
6. 3.5 inch touchscreen :
(1). 480*320 resolution , Resistive touch type ( with touch pen )
(2). The touch screen need to configure the system to use it , otherwise you can not use it. We provide the configure method n the follow link , you can also download the system configure well ( at the bottom of link)
This 3.5 inch touch screen connect to Raspberry Pi by GPIO pin , instead of HDMI port. So please don't use the HDMI port when you connect the 3.5 inch touch screen on Raspberry Pi . The Raspberry Pi doesn't support display on this 3.5 inch touchscreen and other monitor at the same time.
Please plug the screen on Raspberry Pi's GPIO pins correctly( as the picture) , otherwise the touch function will be damaged.
2. Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
3. Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
4. You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).
5. Save the touch parameters (may differ depending on LCD) to 99-calibration.con
Shenzhen Sunhokey Electronic Co., Ltd which was located in Huaqiang North, Shenzhen. We can offer electronic components, 3D printers Parts,ICs, cables and connectors, modules, digital voltmeter, sensors, Raspberry pi,Wi-Fi wireless modules,ect. For more products, please feel free to contact us.